Ruco® Ready Mixed Joint Compound is a non-asbestos, ready-to-apply formulation for embedding drywall tape reinforcement, fasteners, metal corner beads and drywall trims over wallboard. Ready Mixed Joint Compound may also be used for filling, leveling and finishing coats, skim-coating entire wallboard surfaces, and applying simple textures.

Ruco® Ready Mixed Joint Compound is a non-asbestos, ready-to-apply formulation for embedding drywall tape reinforcement, fasteners, metal corner beads and drywall trims over wallboard. Ready Mixed Joint Compound may also be used for filling, leveling and finishing coats, skim-coating entire wallboard surfaces, and applying simple textures.

Ruco® Ready Mixed Joint Compound is a non-asbestos, ready-to-apply formulation for embedding drywall tape reinforcement, fasteners, metal corner beads and drywall trims over wallboard. Ready Mixed Joint Compound may also be used for filling, leveling and finishing coats, skim-coating entire wallboard surfaces, and applying simple textures.

Ruco® Sure Sand Set Type Joint Compound is a non-asbestos, powder formulation for embedding drywall tape reinforcement, fasteners, metal corner beads and drywall trims over wallboard. Set Type Joint Compounds may also be used for filling, leveling and finishing coats, and skim-coating entire wallboard surfaces. Sure Sand is available in 5, 20, 45, 90, 120, and 300 minute set times.

Ruco® Concrete Surfacer is a non-asbestos, ready-to-apply formulation for leveling interior concrete surtaces.

Ruco® Design Texture is a non-asbestos, unaggregated, dry-powder product, formulated for use in spray machines or hand application. Design Texture can be used to create various texture effects such as: fog, splatter, orange peel, knock down, skip trowel, or stipple.

Ruco® Drywall Joint Tape meets ASTM designation C-475. Ruco® Drywall Joint Tape is a quality tape for use with joint compound to reinforce Gypsum Board joints and corners prior to painting, texturing, or wallpapering. Ruco® Drywall Joint Tape is designed for Banjo-style taping machines, automatic taping systems, and hand-taping. Ruco® Drywall Joint Tape is available in 250′ and 500′ rolls.

RuCoat” Equalizer is a specially formulated product designed to minimize surface texture and porosity differences between wallboard face paper and finished joints in new drywall construction. “Joint banding” and “photographing” are common problems that occur due to the differences in absorption rates between drywall face paper and joint compound. This is especially problematic when viewed in direct natural lighting conditions. Ordinary primers/sealers do not adequately address this situation either because they simply provide a film that covers the surface or they lack the necessary type and amount of pigments and/or fillers. RuCoat Equalizer solves this problem by equalizing the porosity of the wallboard face paper and joint compound, thus minimizing the surface texture differences. The result is a more uniform surface that dramatically improves the finish coat.

RuCoat” Equalizer Plus is a specially formulated product designed to reduce the time and effort it takes to accomplish a level 5 gypsum board finish. In accordance with the GA-214/ASTM C-840 level 5 gypsum board finish specifications, a skim coat of joint compound over the entire wallboard surface, followed by a primer coat of paint will give you the highest quality drywall finish. This two-step process is costly and labor intensive. It can be eliminated by applying RuCoat Equalizer Plus in an easy one-step spray application over a level 4 finish. Using RuCoat Equalizer Plus will help provide a superior surface for final decorations.

RESOURCES

COVERAGE AREA

DRYING TIMES

LEVELS OF FINISH

ENVIRONMENTAL

FROZEN MATERIAL

Select the products you're interested in below and we will email you the details shortly

Skip to content